Operation mode：Single-phase/three-phase 220V-240V 0.4kW-2.2kW；Three-phase AC 340V-460V 0.75kW-450kW
Application area：
The PR6300 series inverter is a high-reliability general-purpose inverter launched by Beijing Prostar International Electric Co.,Ltd. PR6300 supports three-phase AC asynchronous motors and permanent magnet synchronous motors. They support a variety of drive control technologies, such as the vector VF (VVF) control and speed sensorless vector control(SVC); speed output and torque output; and Wi-Fi access and background software debugging.
Support the mobile APP and Wi-Fi module to facilitate inverter debugging and monitoring;
Reliable operation with full load at 50°C ambient temperature;
Integration of special functions for rewinding and unwinding;
Support the high-frequency output up to 3000Hz for driving high-speed motors;
Support the 100kHz high-speed pulse input;
He metal substrate should adapt to the vibratory environment to reduce the induced voltage of the motor.
He built-in filter is close to Level C3, so the external
| Specifications | W(mm) | Wl(mm) | H(mm) | Hl(mm) | H2(mm) | D(mm) | Dl(mm) | D2(mm) | d(mm) |
| PR6300-0004S2GB PR6300-0007S2GB | 75 | 65 | 142 | 132 | 146 | 67 | 152 | 4.5 | |
| PR6300-0015S2GB PR6300-0022S2GB | 93 | 82 | 172 | 163 | 136 | 85 | 141 | 4.7 | |
| PR6300-0007T3GB PR6300-0015T3GB | 75 | 65 | 142 | 132 | 146 | 67 | 152 | 4.5 | |
| PR6300-0022T3GB PR6300-0040T3GB | 93 | 82 | 172 | 163 | 136 | 85 | 141 | 4.7 | |
| PR6300-0055T3GB PR6300-0075T3GB | 109 | 98 | 207 | 196 | 154 | 103 | 160 | 5.5 | |
| PR6300-0110T3GB PR6300-0150T3GB | 136 | 125 | 250 | 240 | 169 | 115 | 174 | 5.5 | |
| PR6300-0185T3GB PR6300-0220T3GB | 190 | 175 | 293 | 280 | 184 | 145 | 189 | 6.5 | |
| PR6300-0300T3G PR6300-0300T3GB PR6300-0370T3G PR6300-0370T3GB | 245 | 200 | 454 | 440 | 420 | 205 | 156 | 212 | 7.5 |
| PR6300-0450T3G PR6300-0550T3G | 300 | 266 | 524 | 508 | 480 | 229 | 174 | 236 | 9 |
| PR6300-0750T3G | 335 | 286 | 580 | 563 | 536 | 228 | 177 | 235 | 9 |
| PR6300-0900T3G PR6300-1100T3G | 335 | 286 | 630 | 608 | 570 | 310 | 247 | 317 | 11 |
| PR6300-1320T3G PR6300-1600T3G | 430 | 330 | 770 | 747 | 710 | 311 | 248 | 319 | 13 |
| PR6300-1850T3G | 422 | 320 | 786 | 758 | 709 | 335 | 271 | 256.4 | 11.5 |
| PR6300-2000T3G PR6300-2200T3G PR6300-2500T3G | 441 | 320 | 1025 | 989 | 942 | 357 | 285 | 11.5 | |
| PR6300-2800T3G PR6300-3150T3G | 560 | 450 | 1024 | 1170.5 | 1100 | 400 | 333 | 13 | |
| PR6300-3550T3G PR6300-4000T3G PR6300-4500T3G | 660 | 443 | 1597 | 1567 | 1504 | 430 | 375.5 | 325.5 | 13 |
| Item | Specification |
| Reference power supply | 10V/20mA |
| Terminal control power | 24V/100mA |
| Digital input terminal | 5-channel digital multi-function input: XI to X5 X5 can be used as the high-speed pulse input (max. l00kHZ). |
| Analog input terminal | 2-channel analog inputs: One (All) voltage source: -10 to 10V input; One channel (AI2): 0 to 10V input voltage or 0 to 20mA input current optional; |
| Digital output terminal | Multi-function output of one open collector and one relay Maximum output current of the collector: 50mA; Relay contact capacity: 250VAC/3A or 30VDC/1A, EA-EC: normally open; EB-EC: normally closed |
| Analog output terminal | One multi-function analog terminal output Ml: 0-10V/0-20mA multi-function analog output terminal |
| LED display |
The LED digital tube displays relevant information about the inverter. |
| Protective Function | Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheat, load loss, external fault, etc. |
| Location | Indoor, atari altitude of less than 1 km, free of dust, corrosive gases and direct sunlight. When the altitude is higherthan 1km, it is derated by 1% per 100m. The maximum allowable altitude is 3km. |
| Applicable environment | -10℃ to +60℃, 5% to 95% RH (non-condensing). When the ambient temperature exceeds 50℃, it needs to be derated by 3% per 1℃ temperature rise. The maximum allowable ambient temperature is 60°C. |
| Vibration | Less than 0.5g |
| Storage environment | -40℃~+70℃ |
| Installation method | Wall-mounted or installed in the cabinet |
| Protection level | Standard IP20/IP21 (with plastic baffle) |
| Cooling method | Forced air cooling |
|
Rated voltage of power supply |
Three-phase 340V-10% to 460V+10%, Single-phase/three-phase 200V-10% to 240V+10%; 50-60Hz ± 5%; voltage unbalance rate: <3% |
| Maximum output voltage |
The maximum output voltage is the same as the input power voltage. |
| Rated output current | Continuous output of 100% rated current |
| Maximum overload current | 150% of heavy-duty rated current for 60s (185kW-450kW: 140% of heavy-duty rated current for 60s) 120% of light-duty rated current for 60s |
| Driving mode | V/F control (VVF); speed sensorless vector control (SVC) |
| Input mode | Frequency (speed) input, torque input |
|
Start and stop control mode |
Keyboard, control terminal (two-line control and three-line control), communication |
| Frequency control range | 0.00〜600.00HZ/0.0 〜3000.0HZ |
| Input frequency resolution | Digital input: O.OlHz/O.lHz Analog input: 0.1% of maximum frequency |
| Speed control range | 1:50 (VVF), 1:200 (SVC) |
| Speed control accuracy | Rated synchronous speed ± 0.2% |
| Acceleration and deceleration time | 0.01 s to 600.00 s/0.1 s to 6,000.0 s /1 s to 60,000 s |
| Voltage/frequency characteristics | Rated output voltage: 20% to 100%, adjustable Fundamental frequency 1Hz to 600Hz/3000Hz, adjustable |
| Torque boost | Fixed torque boost curve Any V/F curve is acceptable. |
| Starting torque | 150%/lHz(VVF) 150%/0.25Hz(SVC) |
| Precision torque control | ±5% rated torque (SVC) |
|
Self-adjustment of output voltage |
When the input voltage changes, the output voltage will basically remain unchanged. |
|
Automatic current limitation |
Output current is automatically limited to avoid frequent overcurrent trips. |
| DC braking | Braking frequency: 0.01 to maximum frequency Braking time: 0〜30s Braking current: 0% to 100% of rated current |
| Signal input source | Communication, multi-speed, analog, etc. |